Replacement Of Ceramics Cylinder Unit With Piston - ECOLAB ELADOS EMP KKS Serie Bedienungsanleitung

9.4

Replacement of ceramics cylinder unit with piston

Procedure as described in chapter 9.3.
Fig. 9.4
Unscrew the valve nipple (pos. 6).
Remove the washer (pos. 7), valve ball (pos. 8) and spring (pos. 4).
Unscrew the ceramics cylinder unit (pos. 1) in direction of diaphragm seat.
Insert a new unit. Replace the O-rings (pos.
Re-install valve nipple (pos. 6), balls (pos. 8) etc.
ATTENTION
417101338_EMPKKS.doc
The ceramic cylinder may only be exchanged in connection with the ceramic piston.
Pos.
1
2
3
4
5
6
7
8
9
2, 3, 5, 9)
58
Description
Ceramics cylinder unit
O-Ring, Ø 22 x 2 (FPM)
O-Ring, Ø 22 x 2 (EPDM)
Spring
O-Ring, Ø 14 x 2,5
Valve nipple
Washer
Valve ball
O-Ring, Ø 12 x 1,5
Rev: 08-01.10