Installing The Alarm Or Fault Report Output At 24 V (E11 And E20); Installing The Stroke Signal Output At 24 V / Dc (Only E20) - ECOLAB ELADOS EMP KKS Serie Bedienungsanleitung

7.2.5.1 Installing the alarm or fault report output at 24 V (E11 and E20)

Fig. 7.14

7.2.5.2 Installing the stroke signal output at 24 V / DC (only E20)

Fig. 7.15
417101338_EMPKKS.doc 53 Rev: 08-01.10