Mounting; Mounting Diagram - ECOLAB ELADOS EMP KKS Serie Bedienungsanleitung

6

Mounting

ATTENTION
- The metering pump should be fitted in an easy-to-access, frost-free location.
The ambient temperature must not exceed +40° C.
- The mounting position of the device must be horizontal.
6.1

Mounting diagram

Fig.. 6.1
NOTE
417101338_EMPKKS.doc
The installation must only be performed by authorized personnel and the general
guidelines and local installation regulations must be observed!
The metering valve, pressure control valve and pressure relief valve can be replaced by a
multifunction valve (MFV) from our product range, which combines all of these
functionalities.
Item Description
No.
1. pressure relief valve
2. metering valve / pressure control valve
3. suction pipe / bottom admission valve
46 Rev: 08-01.10