Manual Setting For Operation Level / Sensitivity ( S ) - Balluff BOS 73K-Serie Bedienungsanleitung

"S" Manual setting for operation level/sensitivity
(Function)
Check if the light indication is in " + / - " or in numerals "1, 2, .....8".
The procedure differs depending on which indication appears.
In numerals ( 1, 2, ... 8 )
( Light level indication )
1) Turn the switch to SELECT to show SELE.
2) Push button 1 and select S. Turn the switch to MODE.
RUN
3) A figure of electronic volume flashes.
Ex. Electronic volume is positioned
on 8 and the incoming light level at
that moment is 348.
The display shows the incoming light level at that moment.
4) Push button 2 to shift flashing digit.
The flashing figure on the
light level display shows
On - operation level value.
( The illustration shows On - operation
level is 147. )
SELECT
RUN
SELECT
MODE
MODE
S
BOS 73
SELECT
RUN
MODE
SELECT
RUN MODE
21