Sensor Features / Accessory Features Selection - Balluff BOS 73K-Serie Bedienungsanleitung

Sensor feature / accessory feature selection
How to select sensor features
1) Turn the switch to SELECT.
2) Push button 1. The display will change as
follows by turns to show each sensor /
accessory feature whenever the button is
pushed.
3) Replace the switch to RUN after any feature is selected.
The selected feature herein keeps stored.
How to select accessory features
1) Turn the switch to
MODE after any
feature is selected.
2) The selected
accessory feature
functions.
Addition:When the operation changeover switch 9) is replaced to RUN after an
accessory feature is selected or operated, the sensor feature will function
as it did without change.
16
Indication
A Auto sensing mode
Auto sensing mode &
AV light variation indication mode 17, 18, 20
T Teaching mode
Teaching mode &
TV
light variation indication mode
L Locking mode
Locking mode &
LV
light variation indication mode
Indication
S
Sensitivity & On-operation level changeover21 - 23
Hysteresis ( Off-operation level ) selection
H
V
Absolute value indication
SELECT
RUN
MODE
BOS73
F u n c t i o n i n g
F u n c t i o n i n g
SELECT
RUN MODE
Reference page
17, 20
19
18, 19
20
18, 20
Reference page
24
25