Positioning Of Detection Object; Maximum Sensitivity Setting - Balluff BOS 73K-Serie Bedienungsanleitung

Positioning of detection object

1) Place an object on the
detection point.
2) Push button 1 twice.
Setting is completed.

Maximum sensitivity setting

Through - beam type
1) Block light by an object,etc. to
form light - interrupted condition.
2) Push button 1 twice.
Setting is completed.
Note
If reflection fiber unit is used with max. sensitivity, the unit may be inactivated
when light is interrupted.
Do not fail to set sensitivity by auto / full auto teaching with a detection object.
26
Reflection
type
Detection
object
SELECT
RUN
MODE
SELECT
RUN
Twice
Twice
MODE