Declaration Of Performance - Novoferm iso70-1 TW Montage- Und Betriebsanleitung

For base coated doors, the top coat must be applied
on site within three months from the date of delivery.
Small surface defects, minor corrosion, dust inclu-
sions or scratches on the surface of base coated
doors do not constitute grounds for complaint since
they will disappear after sanding the surface and after
a final treatment has been performed.
Exposure to direct sunlight may cause doors with a
width of about 3 metres or more or with a dark paint
or foil surface to bend, and functionality may be im-
paired.
Our products are subject to technical alterations in
the course of product modifications, changes in col-
ours or materials, or changes in production pro-
cesses, which may alter their appearance. Such alter-
ations are deemed conditionally acceptable when re-
placing parts under warranty.
We must be notified of any defects immediately in
writing; on request, the parts in question are to be
made available to us. We shall not bear the costs for
dismantling and installation, freight, and carriage. In
the event that a complaint ultimately proves to be un-
justified, we reserve the right to charge the costs in-
curred.
This guarantee is only valid in conjunction with the
signed invoice and commences on the day of deliv-
ery.
11

Declaration of Performance

The Declaration of Performance in your native lan-
guage can be found in the annex of these assembly
instructions.
EN - 31