Important Comments; Swimming Pool Earthing; Introductory Information; Swimming Pool Parts - Mountfield IBIZA Montageanleitung

1

Important comments

Read all sections of this document
carefully and strictly follow all
instructions.
Illustrations and pictures in this document are partly
symbolic and typical presentations to give the reader
a general idea of the topics described.
Inspect the package(s) delivered before starting the
assembly to make sure that all parts of the swimming
pool have been provided. Inspect all parts to detect
any defect. Mountfield shall not be liable for any
damage arising during the shipment if claimed after
assembling the parts. Mountfield reserves the right to
make changes resulting from technological progress.
Make sure that the steel wall will come in
contact with suitable building materials
only.
For instance, if you intend to use silicone, make
sure that this material contains no acids that may
damage the steel wall's protective coating and
potentially result in corrosion. It may be
necessary to determine if the materials planned
are appropriate with respect to the intended use.
1.1

Swimming pool earthing

The swimming pool wall and all large-area metallic
parts must be bonded in compliance with applicable
local regulations. This is a job for a qualified
electrician.
For this, the steel wall may be drilled through in the
lower part (and then treated with a zinc spray or a
plastic paint) and the earthing cable connected to a
metallic bolt (Fig. 1). The cable is routed from the bolt
to an earthing pole.
Warning: All electrician's work must be
done by a qualified company and in
compliance with applicable electrical
standards (such as DIN VDE 0100 Part
702).
2

Introductory information

2.1

Swimming pool parts

Sliding-in section
for joining the
vertical steel wall
edges
Pool liner
Top wall edge
trim
The picture above does not show all parts
delivered. The design and colour of the
parts delivered may differ from what is
shown.
The illustrations and pictures reproduced
here may differ from the product actually
delivered. They are only meant to help the
reader understand the text herein.
The manufacturer reserves the right to
make changes without prior notice.
Fig. 1
3
Steel wall
Bottom wall edge
trim
Aluminium top
wall rail
Fig. 2