Mountfield IBIZA Montageanleitung Seite 18

4.5.2 Return nozzle
The IBIZA swimming pools use normally 1 return
nozzle, located next to the skimmer. Here also the
cutting edges should be treated with anticorrosion
coating.
4.5.2.1 Return nozzles for fixed (buried) piping
Important! The nozzle bodies must be
used now, prior to the installation of the
liner, because they are specific high-
quality return nozzles with a flange on
the swimming pool side, which – in
contrast to conventional nozzles –
facilitate appreciably any later liner
replacement.
The flange  is needed for the final nozzle
installation. If the nozzle flange cannot be found
promptly, it is probably inserted into the cover .
Compress/bend the cover slightly to separate the
flange and mount the flange (see Fig. 48).
Fig. 46
4
7
Fig. 47
1
1) Adjusting ring
3) Nozzle body
5) Screws
7) Flange
9) Hole-less gasket
If the return nozzle is completed with an additional
hole-less gasket , this gasket is not used for
swimming pool with steel walls.
17
3
6
2
5
2) Nozzle eye
4) Safety nut
6) Cover
8) Gasket
Fig. 48
8
9
Fig. 49