Complete The Technology Installation Procedures - Mountfield IBIZA Montageanleitung

Skimmer basket:
When using the pool, the skimmer basket must be
freed from impurities and tree leaves periodically for
the filter system to work perfectly. To this end – and
also for vacuum cleaning of the pool bottom – the
skimmer cover must be readily accessible. Make sure
that the skimmer basket sits well, is not lifted and
does not block the skimmer flap and hence, the water
flow (see Fig. 88).
Use the suction plate only in combination with the
pool bottom cleaner hose, not during the normal filter
operation!
4.9 Complete the technology
installation procedures
Prior to filling the swimming pool completely with
water and completing the full installation, the various
parts of the technology (skimmer, return nozzle,
lights. countercurrent, ...) must be (inter)connected.
The piping should be stiff or flexible, with a PVC pipe
resistant to the pressure of the earth and to the
pressure of water. All connections should be
accessible for inspection or be certified against leaks.
Installation of a return flap in the filter pump suction
segment is recommended if the filter unit is installed
above the water surface level in the swimming pool.
Electrical cables should be drawn through ducts to
the site where the machine room/distribution box will
be installed.
Fig. 87
Fig. 88
Fig. 89
26