Mountfield IBIZA Montageanleitung Seite 17

The sketch above shows the dimensions of a
standard skimmer for attachment by using swimming
pool hoses 38 mm in diameter. If a different skimmer
is to be used, an appropriate template / correct
dimensions and spacing must be used.
We recommend that the cutting edges be ground
smooth and treated with an anticorrosion product or
plastic paint prior to the installation.
If the piping is to be mounted now, installation of the
skimmer at this stage is recommended. For this, put
the double gasket over the steel wall (see Fig. 43),
hold the skimmer at the opening from the outside and
fix it from the inside with rounded head safety screws
(see Fig. 45). If 2 individual gaskets have been
provided in place of the conventional skimmer double
gasket, they must be put on in order: skimmer body –
gasket – steel wall – gasket (– pool liner – skimmer
flange).
This also applies to the return nozzle gasket(s) (for
more information please read page 24, "Internal parts
installation").
In certain circumstances it may be necessary to
prepare additional holes in the steel wall (and coat
them with an anticorrosion paint) because not always
are the holes for the screws ready.
If installing the piping later is feasible, the skimmer
can also be installed later along with the installation
of the liner (see page 20).
Fig. 41
Flange screw
Fig. 42
16
Fig. 43
Fig. 44
Safety screw
Fig. 45