Mountfield IBIZA Montageanleitung Seite 23

Complete the top wall edge trim installation only after
smoothing the liner welds.
4.7.1 Installation of the top wall edge trim
(general)
Combine the top wall edge trim parts together by
using joining pins and by impacting on the swimming
pool edge with your hand or with a rubber hammer.
At the same time fasten the suspension section. If the
top wall edge trim is too long, shorten it (see Fig. 68–
70).
Fig. 67
Professional hint: The delivery of the top
aluminium rail includes 2 plastic covering
strips. It may happen during the swimming
pool filling that a major gap emerges on one
or the other side of a segment of the top rail
due to steel wall expansion. Once the
swimming pool is complete, use the strips to
cover such places.
Cover the plastic top wall edge trim joints with
aluminium strips (if provided).
Fig. 68
Fig. 69
22
Fig. 70