Mountfield IBIZA Montageanleitung Seite 22

Irrespective of the top wall edge trim, the pool liner
has its own suspending edging (see Fig. 64).
Notes on the top wall edge trim:
The wedge-shaped side rabbet on the specific top
wall edge trim will be used later when the liner is
replaced if a hem is laid on the top wall edge trim. For
this, the old liner is cut off and the remaining
suspending profile continues to be used to protect the
edge. Only the second liner, which has a wedge
section rather than a suspending section, will be hung
into the rabbet in the top wall edge trim.
Fig. 62
(Example of a specific combined top wall edge trim)
Put the edge of the liner with the welded-on
suspension section over the steel wall edge and fix
the liner with a few parts of the trim (see Figs. 65–
Fig. 63
67).
Fig. 64
21
Fig. 65
Fig. 66