Preparation Of Openings For The Accessories - Mountfield IBIZA Montageanleitung

In this manner the steel wall is fastened directly onto
the retaining wall.
In order to protect the swimming pool liner, cover the
screw heads with an adhesive tape that will not
damage the PVC (with a packaging tape for
instance).
Caution: Make sure that the swimming
pool stands perfectly horizontally.
Manufacturer's warranty becomes void
and null it the height difference is larger
than 2 cm. If this is the case, identify the
cause a eliminate the problem, e.g. by
improving the base.
4.5 Preparation of openings for the
accessories
Important: Follow also the accessory manufacturers'
guidelines if attached to the products. If in doubt,
contact your seller.
4.5.1 Skimmer (to collect any foreign matter
from the water surface)
Fig. 36
Fig. 37
1) Skimmer body
3) Teflon tape 4) Hose adaptor
5) Double gasket
Openings in the swimming pool steel wall for the
skimmer may be present from the factory. If not, they
must be cut out/drilled.
Fig. 38
15
1
3
5
6
2) Vacuum plate
6) Nozzle
2
4
Fig. 39
Fig. 40