BMW 7 Serie E 38 Einbauanleitung Seite 22

2.2 Overview of power supply wiring harness
Fold out folded page 2-19.
Item Design/Description
Power supply wiring harness
A
Blade terminal contact
A1
Joint connector contact
A2
Joint connector contact
A3
2-pin socket casing
B
C
D
1-pin socket casing
E
6-pin socket casing
F
Socket contact
G1
Socket contact
G2
12-pin socket casing
H
2.3 Overview of adapter wiring harness for RHD models
Fold out folded page 2-21.
Item Design/Description
Adapter cable for RHD
I
1-pin plug casing
I1
1-pin socket casing
I2
2-12/EN
Cable colour Connection location in car
GN/BK Connect to fuse holder IV, A49, at fuse
slot F64
WI/GR/YE Connect to I bus joint connector behind the
rear boot trim above the right-hand wheel arch
BR/BK Connect to ground joint connector next to
the battery
Connect to PDC speaker (H40) below the rear
window shelf, right
GR/RD Select the GR/RD cable, cable cross-section
0.5 mm or 0.75 mm
2
the front and secure cable C with miniature
high-speed connectors, cars without a switch
centre only
BR/BK Select the BR/BK cable, cable cross-section
0.5 mm 2 or 0.75 mm
the front and secure cable D with miniature
high-speed connectors, cars without a switch
centre only
BK/YE On LHD only, connect to gong (H10), pin T4,
on RHD only, connect to I1
Connect to PDC switch (S111), cars without
a switch centre only
Cars with a switch centre only, cut BR/BL/YE
cable above the 6-pin socket casing F , crimp
on G1 and connect to the plug in the switch
centre (X1869), pin 9
Cars with a switch centre only, cut BR/GR/YE
cable above the 6-pin socket casing F , crimp
on G2 and connect to the plug in the switch
centre (X1869), pin 8
Connect to PDC control unit (A81)
Cable colour Connection location in car
For RHD models only
BK/YE Connect to E
BK/YE Connect to gong (H10), pin T4
, in the centre console at
2
2 , in the centre console at
Abbreviation/Slot
X10018/32
X18226
X13075
X362
X001
X002
X363
X361
X1869/9
X1869/8
X300
Abbreviation/Slot
X003
X363