Troubleshooting - Bosch MCM 21-Serie Gebrauchsanleitung

en
After processing
S Set the rotary switch to O.
S Rotate the lid as far as possible in an
anti clockwise direction and remove.
S Rotate the bowl as far as possible in an
anti clockwise direction and remove.
S Remove the tool.
Blender
d Risk of injury from sharp blender blades
/ rotating drive!
NEVER put fingers in the attached blender.
Before operating the appliance, always attach
the lid.
Before removing / attaching the blender, wait
until the appliance has come to a standstill.
d Risk of scalding!
If hot liquids are processed, steam escapes
through the funnel in the lid.
Add a max. 0.4 litres / 14 fl oz of hot liquid.
Warning!
Blender may be damaged
Do NOT process frozen fruit or vegetables.
Do NOT operate the appliance at no load.
Blending
Before operating the blender, attach the
bowl (6) and lid (7a) and lock in position.
Take tools out of the bowl!
S Attach the drive cover (2).
S Attach the blender jug (10) and rotate as far
as possible in an anti clockwise direction.
S Add ingredients; see Recipes / Ingredients /
Processing".
Maximum capacity of liquid = 1 litre / 2¾ pt
(max. 0.4 litres / 14 fl oz frothing or hot
liquids).
Optimum processing quantity of solid
ingredients = 100 g / 3½ oz.
S Attach the lid (11a) and lock into position by
rotating in an anti clockwise direction.
S Select the desired setting with the rotary
switch; see Recipes / Ingredients /
Processing".
After blending
S Set the rotary switch to O.
S Rotate the blender as far as possible in
a clockwise direction and remove.
S Rotate the lid in a clockwise direction and
remove.
Note: It is recommended to clean the blender
immediately after use; see Cleaning and
servicing the appliance".
10
Adding more ingredients
S Set the rotary switch to O
(or as indicated in the recipe).
S Remove the lid (11a) and add the ingredients
or
S remove the funnel from the lid and gradually
add solid ingredients through the refill
opening (11b)
or
S pour liquid through the funnel (11c).

Troubleshooting

Fault
Appliance cannot be switched on.
Cause
Lid is not locked in position.
Remedial action
Correctly position the lid; see Fig. 7a
Switching on the appliance again."
If other faults occur, please consult our
customer service.
Cleaning and servicing the
appliance
d Risk of electric shock!
NEVER immerse the base unit in water or
place under running water.
Warning!
Surfaces may be damaged.
Do NOT use abrasive cleaning agents.
Cleaning the base unit
S Pull out the mains plug.
S Wipe the base unit with a damp cloth.
If required, use a little detergent.
Cleaning the bowl and accessories
d Risk of injury from sharp blades!
Grip the chopping blades and cutting discs by
the plastic handle only.
All parts are dishwasher safe.
Do NOT wedge plastic parts in the dishwasher
as they could warp.
Insert the chopping blades with the opening
pointing downwards, ensuring that the blades
do not damage any other parts.
Shredding carrots, red cabbage or similar
vegetables will cover the plastic parts in a red
film which can be removed with a few drops
of cooking oil.