Troubleshooting - Bosch MUM-Serie 2 Gebrauchsanleitung

11 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out by trained specialist
staff.
▶
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The appliance is not
working.
Appliance does not
start processing.
Appliance does not
start processing or
switches off during
processing.
The swivel arm cannot
be opened or closed
because the tool is
jammed in the bowl.
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
▶ Connect the appliance to the power supply.
The circuit breaker is faulty.
▶ Check the circuit breaker in the fuse box.
There has been a power cut.
▶ Check whether the lighting in your kitchen or other
appliances are working.
Rotary switch is set incorrectly.
▶ Set the rotary switch to
Swivel arm is not engaged properly or has become
detached.
Set the rotary switch to
1.
Move the swivel arm until it engages correctly.
2.
Drive is not in the parked position after a safety sys-
tem has stopped processing or the power supply has
been interrupted.
Set the rotary switch to
1.
Eliminate the problem that caused the appliance to
2.
stop.
→ "Safety systems", Page 31
When the swivel arm is open, remove the tool and
3.
close the swivel arm.
Set the rotary switch briefly to and then back to
4.
⁠ .
a The drive remains on for a short time until the
parked position is reached.
Troubleshooting en
before processing.
⁠ .
⁠ .
35