Troubleshooting - Bosch 8 OptiMUM Serie Gebrauchsanleitung

11 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out by trained specialist
staff.
▶
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The appliance is not
working.
Appliance does not
start processing.
Appliance does not
start processing or
switches off during
processing.
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
▶ Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶ Check the circuit breaker in the fuse box.
There has been a power cut.
▶ Check whether the lighting in your kitchen or other
appliances are working.
Rotary switch is set incorrectly.
▶ Set the rotary switch to
Processing quantity is too great or processing time
was too long.
▶ Set the rotary switch to
▶ Reduce the quantity of ingredients.
▶ Allow the appliance to cool down to room temperat-
ure.
Appliance or accessory is blocked.
▶ Set the rotary switch to
▶ Remove the blockage.
Swivel arm is not engaged properly or has become
detached.
Set the rotary switch to
1.
Move the swivel arm until it engages correctly.
2.
Bowl or bevel gear is not fitted properly or has be-
come detached.
▶ Turn the bowl anticlockwise as far as possible.
Troubleshooting en
before processing.
⁠ .
⁠ .
⁠ .
39