Controls And Functions; Front Panel - Yamaha R-S300 Bedienungsanleitung

CONTROLS AND FUNCTIONS

Front panel

1 A (power)
Turns on and off the power of this unit (see page 13).
On position: Pushed inward
Off position: Released outward
Note
This unit consumes a small amount of power even when turned
off or when in standby mode.
2 Power indicator
Lights up as follows:
Brightly lit: Power is on
Dimly lit: Standby mode
Off: Power is off
Note
If an iPhone/iPod is charged while this unit is in standby mode,
the power indicator lights up brightly.
3 SPEAKERS A/B
Turns on or off the speaker set connected to the
SPEAKERS A and/or SPEAKERS B terminals on the rear
panel each time the corresponding button is pressed (see
page 13).
4 TP
Searches automatically for a station that provides traffic
program (TP) broadcasts (see page 24).
4
En
CONTROLS AND FUNCTIONS
5 INFO
Turns on and changes the Radio Data System display
mode when TUNER is selected as the input source (see
page 23).
Changes the playback information displayed about the
song playing on the iPhone/iPod when DOCK is selected
as the input source (see page 26).
Note
Playback information can only be displayed for an iPhone/iPod
that is connected using a Universal Dock for iPod.
6 MEMORY
Stores the current FM/AM station as a preset when
TUNER is selected as the input source (see page 20).
7 CLEAR
Clears the current FM/AM preset station when TUNER is
selected as the input source (see page 21).
8 Front panel display
Shows information about the operational status of this
unit.
9 PRESET j / i
Selects a preset FM/AM station when TUNER is selected
as the input source (see page 21).
0 FM, AM
Sets the FM/AM tuner band to FM or AM when TUNER
is selected as the input source (see page 17).