General Device Description - OSRAM e:cue SYMPL bridge Node Bedienungsanleitung

General device description

2 General device description
e:cue SYMPL Nodes are a system of interfaces for e:cue SYMPHOLIGHT
only. They provide various connection types like DMX/RDM, DALI, digital
inputs and outputs etc. SYMPL Nodes always operate in online mode, as a
device interface for SYMPHOLIGHT. All interactions are initiated and
controlled by SYMPHOLIGHT. Connections between servers, Cores and
Nodes are always made with e:net via Ethernet.
The SYMPL bridge Node is an Art-Net / e:net / sACN to e:pix / DMX
interface. It comes with 8 x DMX / e:pix universes over screw terminal
plugs.
The SYMPL bridge Node is designed for the control of medium to large size
installations with sACN, Art-Net and e:net. Switch between two input
sources on the fly. The SYMPL bridge Node makes it possible to run up to
4096 DMX channels (= 1360 RGB pixels, 170 pxl/universe) via DMX
universes and up to 16,384 DMX channels (= 5456 RGB pixels, 682 pxl/
universe) via e:pix universes. The SYMPL bridge Node supports up to 32
sACN / Art-Net universes.
With an extended operating temperature of -40 ... 70°C (max 1 hour/day;
continuous operation at max. 60 °C) the SYMPL bridge Node is suited for
projects in tough outdoor environments. In addition to embedded
temperature and humidity sensors whose data is readable in
SYMPHOLIGHT, a backup on data loss and test modes add to the features
of the SYMPL Node.
The SYMPL Node is powered by an external power supply or via Power-
over-Ethernet. It is easily mounted on standard 35 mm DIN rails, or with a
key hole in the housing base on walls or on any stable vertical surface.
09