Security instructions
1
Security instructions
Please read and follow the safety instructions, provided in a separate
manual, carefully. Make sure that the environmental, mounting, and
installation prerequisites are met. This manual should be kept at a safe
place and in reach of the device.
1.1
Symbols
The exclamation mark warns about possible damage of the
!
device itself or connected devices.
i
The information symbol gives general hints and informs
about handling and procedures for use of the device.
1.2
General security instructions
Connect cables and data only when the device is powered
!
down.
Ground the Ethernet and DMX connection cables for outdoor
!
installations (optional for indoor only). Connect the
SYMPL bridge Node to Protective Earth when at least one
connected cable runs outdoor.
The device must be supplied by a separate certified SELV
!
Class 2 power supply.
i
If security instructions are missing, please contact the
OSRAM support service to receive a new copy.
08