Network Configuration; Default Network Properties; Network Configuration With Sympholight - OSRAM e:cue SYMPL bridge Node Bedienungsanleitung

5

Network configuration

The network properties of the device are preconfigured. The successful
installation of the power supply is required for changing the network
configuration. You can either adjust the network settings with
SYMPHOLIGHT or using the web interface of the device.
5.1

Default network properties

The SYMPL bridge Node has as factory setting the default IP address
192.168.123.1.
Subnet mask: 255.255.255.0.
DHCP is disabled by default.
Login credentials for the web interface of the SYMPL bridge Node:
The default password is: ecue
To change the network configuration use either SYMPHOLIGHT or the web
interface of the device:
5.2

Network configuration with SYMPHOLIGHT

1. Open the context menu of the SYMPL bridge Node in the Setup
tab of SYMPHOLIGHT by a right-click on the device.
Network configuration
19