Firmware Update - OSRAM e:cue SYMPL bridge Node Bedienungsanleitung

Firmware Update

Exit the Test mode by leaving the Test mode page, e.g. go to "Dashboard"
or double-pressing the Identify button.
8 Firmware Update
In case a new firmware version is available, you can either use
SYMPHOLIGHT or the web interface of the SYMPL bridge Node to update
the device.
Updating with SYMPHOLIGHT
Use the usual update options in the Device Tree of the Setup tab in
SYMPHOLIGHT: select "Update firmware" in the context menu of the
SYMPL bridge Node or click the Update button
Updating with web interface
1. Save the new firmware file from www.ecue.com.
2. To access the web interface, open a common web browser on a
connected PC. Enter the SYMPL bridge Node's IP address into the
address bar:
e.g. http://192.168.123.1.
3. On the left side, select "Settings" and click the "Firmware update"
button at the end of the page:
30
3.
in the head toolbar.