General Remarks; Transport; Unpacking; Warranty Regulations - OSRAM e:cue SYMPL bridge Node Bedienungsanleitung

General remarks

3 General remarks
3.1

Transport

Only transport the device in its original packaging. This protects the device
from damage.
3.2

Unpacking

Only unpack the device at its installation location. To protect the device
against condensation water, unpack it and wait until all moisture remaining
in the device has evaporated. Condensation can occur when the device is
moved from a cold to a warm location. Keep the packaging for use in case
of further transport. Inspect all parts for completeness regarding chapter
"2.1 Delivery content" (page 10). If there is apparent damage to the
device or parts are missing from the delivery scope, please contact the
OSRAM support service.
3.3

Warranty regulations

Depending on the product, guaranty regulations are of different duration.
The warranty time is usually noted in the quote and in the order
confirmation. See "Services"  "OSRAM Guarantees" at www.osram.com
for details. Legal warranty regulations apply in any case.
3.4

Maintenance and Repair

This device requires no maintenance.
Before dismounting, appropriate measures must be taken to
!
protect the respective components against damage caused
by electrostatic discharge (ESD protection).
Do not try to repair the device. Return it to your OSRAM
!
distributor for replacement or repair.
14