Operation - Cameo FLAT PRO 7 G2 Bedienungsanleitung

OPERATION

PLEASE NOTE
X As soon as the spotlight is correctly connected to the power supply, the following will be displayed in succession: "Welcome to Cameo",
the model name and the software version. After this process, the spotlight is ready for operation and the previously activated operating
mode is launched.
X To return directly from the submenus to the main display, press and hold the MENU control for around 3 seconds. The main display is
activated automatically if no input is made within approximately 30 seconds. To navigate one level up in the submenus, briefly press
MENU.
X To directly access the previously edited menu item, briefly press MENU and ENTER at the same time.
X Briefly pressing UP when in the main display rotates the display by 180°.
X To quickly change a value, such as the DMX start address, press and hold UP or DOWN.
X Before changing device settings, ensure that the control panel is dry and dust free, in order not to impair its functionality.
MAIN DISPLAY DMX OPERATING MODE
The display shows the DMX address and current DMX start address (in the example 001). If the DMX Delay feature is activated, the delay
group and delay time are also displayed.
MAIN DISPLAY STANDALONE MODE
The display shows the currently activated standalone mode
(Mode Auto, Mode Static, Mode CCT, Mode Color Preset, Mode User Color, Mode Loop).
MAIN DISPLAY SLAVE MODE
The display shows Mode Slave. If the slave unit is assigned to a slave group, the slave group and the delay time set in the master unit
under the standalone operating modes Auto and Loop are also displayed.
CONFIGURE DMX START ADDRESS
Press MENU to access the main menu. Now use UP and DOWN to select the menu item DMX address and confirm with ENTER. You can
now configure the DMX start address as you wish with UP and DOWN and confirm with ENTER. The highest value depends on the DMX
mode activated.
7