Herunterladen Inhalt Inhalt Diese Seite drucken

Cameo FLAT PRO 7 G2 Bedienungsanleitung Seite 12

Professional outdoor flat par can 7 / 12 / 18 x 10 w ip65
Vorschau ausblenden Andere Handbücher für FLAT PRO 7 G2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
SYSTEM SETTINGS (SETTINGS)
Starting from the main display, press MENU to enter the main menu. Use UP and DOWN to select the menu item Settings and confirm
with ENTER.
This will take you to the submenu for setting the submenu items (see table, select with UP and DOWN, confirm with ENTER, change value or
status with UP and DOWN, confirm with ENTER).
Settings
Display Reverse
Display backlight
Signal Fail
PWM Frequency
Dimmer response
Dimmer curve
Redshift
Color calibration
12
=
Rotate display
=
Display lighting
=
Operating status with DMX signal
fault
=
LED PWM frequency
=
Dimmer response
=
Dimmer curve
=
accurately mimics the color drift of
dimming a halogen spotlight. When
dimming the spotlight, the color
temperature changes automatically
to increasingly warm white tones
and amber (and vice versa).
=
Color calibration
Off
No display rotation
On
Display is rotated by 180° (e.g. for
overhead installation)
Off
Deactivates after approximately 30
seconds of inactivity
On
On permanently
Hold
Last command is retained
Blackout
Activates blackout
Fade
slow fade out to blackout
User Color 1
User Color 1 is activated
650Hz, 1530Hz,
Select LED PWM frequency
2000Hz, 3600Hz,
12kHz, 25kHz
LED
Lamp responds abruptly to changes
in DMX value
Halogen
Spotlight behaves like a halogen spo-
tlight with soft brightness changes
Linear
Light intensity increases linearly with
DMX value
Exponential
Light intensity can be finely adjusted
at lower DMX values and broadly
adjusted at higher DMX values
Logarithmic
Light intensity can be broadly adjusted
at lower DMX values and finely
adjusted at higher DMX values
S-curve
Light intensity can be finely adjusted
at lower and higher DMX values and
broadly adjusted at medium DMX
values
Off
Color drift is disabled
On
Color drift is enabled
Calibrated
Factory calibration of R, G, B and A
(across all modes)
RAW
R, G, B, W and A with maximum
value 255
User
Individual color calibration. Cross-mo-
de brightness setting of R, G, B, W and
A values from 0 - 255

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis