System Info - Cameo FLAT PRO 7 G2 Bedienungsanleitung

Reset =
Edit Preset =
Autolock =
SYSTEM INFORMATION (SYSTEM INFO)
Starting from the main display, press MENU to enter the main menu. Now use UP and DOWN to select the menu item System Info and
confirm with ENTER.
This will take you to the submenu for accessing the system information (see table, selection with UP and DOWN, confirm with ENTER,
change status with UP and DOWN, confirm with ENTER).

System Info

Firmware = Displays device firmware
Temperature = Displays temperature of LED unit
Operation Time = Displays operating time
MANUAL LOCKING FUNCTION
In addition to the ability to automatically protect the lamp from accidental and unauthorised operation (see "Settings" – "Auto-lock"),
the controls can also be locked manually. For this purpose, press and hold UP and DOWN simultaneously for approximately 5 seconds.
"Locked!" is now displayed and it is no longer possible to change the spotlight's settings via the controls. To unlock, press and hold UP and
DOWN simultaneously for approximately 5 seconds.The display will show the previously displayed information.
Reset settings
Store all system settings in 3
individual presets
Automatic locking of the controls
Factory Reset to factory settings: Perform
reset with ENTER, cancel with MENU
Preset A Reset to Preset A: Perform reset with
ENTER, cancel with MENU
Preset B Reset to Preset B: Perform reset with
ENTER, cancel with MENU
Preset C Reset to Preset C: Perform reset with
ENTER, cancel with MENU
Preset A Store with ENTER
Preset B Store with ENTER
Preset C Store with ENTER
Off Automatic locking of the controls is
disabled
On Automatic locking of the controls after
approximately 30 seconds of inactivi-
ty. Display shown upon attempted use
"LOCKED". Unlock: Press and hold UP
and DOWN simultaneously for approx.
5 seconds
Main CPU
V1.xx
LED
Celsius/Fahrenheit
OpTime xxxx:xxh
xxx°C / xxx°F
Celsius (= display in degrees
Celsius)
Fahrenheit (= display in degrees
Fahrenheit)
Displays total operating time in
hours and minutes
13