Cameo FLAT PRO 7 G2 Bedienungsanleitung Seite 9

Spotlight (group) 0
No delay
AUTO STANDALONE MODE
The 6 available auto-programmes each comprise non-editable color-change sequences; Random scenes, brightness, speed and delay can
be set separately for each programme in some cases.
Starting from the main display, press MENU to enter the main menu. Now use UP and DOWN to select the Stand Alone menu item and confirm
with ENTER. Use UP and DOWN again to select the Auto standalone mode and confirm with ENTER. Now use UP and DOWN to select the desired
programme and confirm with ENTER.
This will take you to the submenu for setting the submenu items (see table, select with UP and DOWN, confirm with ENTER, change value
or status with UP and DOWN, confirm with ENTER). The settings for each programme are made separately and are retained even after
restarting the device.
AUTO STANDALONE MODE
Dimmer Sets brightness
Speed Sets running speed
Delay Delay time for slave groups
STATIC STANDALONE MODE
The Static standalone mode allows the Dimmer, Strobe, R, G, B, W and A values to be set directly on the device with values in a similar way
to with a DMX controller. In this way, an individual scene can be created without an additional DMX controller.
Starting from the main display, press MENU to enter the main menu. Using UP and DOWN, select the Standalone menu item and confirm
with ENTER. Again use UP and DOWN to select the Static standalone mode and confirm with ENTER. Using UP and DOWN, now select the
menu item that you wish to edit and confirm with ENTER. You can use UP and DOWN to configure the desired value between 000 and 255.
The strobe effect values correspond to those in channel 2 of the DMX table 4 CH Mode 1. Confirm all entries with ENTER.
Spotlight (group) 1 Spotlight (group) 3
0.5 s delay 1 s delay
Spotlight (group) 3 Spotlight (group) 4
1.5 s delay 2 s delay
Spotlight (group) 5
2.5 s delay
0–100
0–100
0.0 s to 2.0 s
9