Legal Information - Ottobock 10V39 Gebrauchsanweisung

Mounting the adapter 10A30=1
Adapter for using the 10V39 in conjunction with terminal devices with
standard pins.
Insert the standard pin of the terminal device into the standard connection
of the 10A30=1 and secure the closure by turning the clamp sleeve to the
right. Mount the terminal device with adapter into the wrist unit.
7.4 Fabricating a laminated socket
Use the 743A18 Alignment Tool with wrist unit diameter 45 mm or 50 mm
during the fabrication of the laminated socket. For assembly of the 10V39
MovoWrist Flex, please follow the instructions under section 7.1.
8 Disposal
In some jurisdictions it is not permissible to dispose of the product with un-
sorted household waste. Improper disposal can be harmful to health and the
environment. Observe the information provided by the responsible authori-
ties in your country regarding return, collection and disposal procedures.

9 Legal information

All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
9.2 Liability
The manufacturer will only assume liability if the product is used in accor-
dance with the descriptions and instructions provided in this document.
The manufacturer will not assume liability for damage caused by disregard
of this document, particularly due to improper use or unauthorised modi-
fication of the product.
9.3 CE conformity
The product meets the requirements of Regulation (EU) 2017/745 on medi-
cal devices. The CE declaration of conformity can be downloaded from
the manufacturer's website.
18 | Ottobock