Construction And Function; Combination Possibilities; Service Life - Ottobock 4R118 Gebrauchsanweisung

► Instruct the user in the proper and safe use of the product.
► Please keep this document in a safe place.

1.1 Construction and Function

The 4R118 adapter plate is installed between the socket attachment block
and the socket adapter of a TF prosthesis. It shifts the prosthetic knee joint
in the posterior direction. The adapter plate can be used for repositioning
between 10 mm and 25 mm.

1.2 Combination Possibilities

This prosthetic component is part of the Ottobock modular system. As a res­
ult of its design, it may be combined with other prosthetic components of the
modular system. You can find possible restrictions in this section. Contact
the manufacturer with questions.
Socket attachment
block
Socket adapter
2 Application
2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of Application
The product must be used in TF prostheses only.
Approved for a body weight of up to 125 kg.
2.3 Environmental Conditions
Allowable environmental conditions
Temperature range for use: -10 °C to +60°C
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, fresh water, salt water, acids
Dust, sand, highly hygroscopic particles (e.g. talcum)

2.4 Service Life

In general, all modular adapters are tested by the manufacturer for 3 million
load cycles. Depending on the patient's level of activity, this corresponds to
a service life of 3 to 5 years.
5R1=1, 5R1=2, 5R1=6, 5R2, 5R6=1, 5R6=2, 5R6=3
4R22, 4R37, 4R51, 4R55, 4R95
Ottobock | 9