Before Use; Lubrication - Parkside PDKS 6.3 B3 Originalbetriebsanleitung

Before use

Lubrication

WARNING!
► Avoid eye and skin contact with lubricants .
► Inform yourself about the health hazards of the oil used in the
safety data sheet of the respective manufacturer .
NOTE
► Regular lubrication is particularly important to avoid friction and
corrosion damage . We recommend using a suitable special oil
for compressed-air tools (e .g . Liqui Moly compressor oil) .
–
Lubrication with mist oiler
A mist oiler (not supplied) continuously and optimally
lubricates the grinder as a preparation stage after the
pressure reducer . A mist oiler gives off fine drops of oil into
the air flow and thus guarantees a regular lubrication .
–
Manual lubrication
If you do not have a mist oiler, lubricate the tool before
every use or longer work sessions . Add 3–5 drops of
pneumatic oil into the connector nipple
■ 16 │ GB │ CY
.
PDKS 6.3 B3