Initial Use; Unpacking; Accessories; Before Use - Parkside PDBG 125 A1 Bedienungs- Und Sicherheitshinweise

WARNING!
This product produces an electromagnetic
u
field during operation! This field may under
some circumstances interfere with active or
passive medical implants! To reduce the risk
of serious or fatal injury, we recommend
persons with medical implants to consult their
doctor and the medical implant manufacturer
before operating this product!

Initial use

Q

Unpacking

Q
WARNING!
The product and the packaging are not
u
children's toys! Children must not play with
plastic bags, sheets and small parts! There is
a danger of choking and suffocation!
1. Unpack all parts and lay them on a flat,
stable surface.
2. Remove all packing materials and shipping
devices if applicable.
3. Make sure the delivery contents are complete
and free of any damage. If you find that
parts are missing or show damage do not
use the product but contact your dealer. Do
not use the product unless missing parts have
been delivered in addition or defective parts
have been replaced. Using an incomplete
or damaged product represents a hazard to
people and property.
4. Ensure that you have all the accessories and
tools needed for assembly and operation.
This also includes suitable personal protective
equipment.

Accessories

Q
To operate this product safely and correctly, the
following accessories, i. e. tools and attachments,
are necessary:
Suitable personal protective equipment
o
Ensure that you have the accessories and
tools needed for commissioning and operation
available. This also includes suitable personal
protective equipment.
Accessories and tools are available through your
authorised dealer. When buying always consider
the technical requirements of this product (see
"Technical data").
If you are not certain, ask a qualified specialist and
get advice from your trusted dealer.
12 GB
NOTE
This instruction manual contains information
u
and suggestions for several attachments and
their uses. The attachments depicted are not
necessarily included in the shipment, but are
meant to indicate additional possibilities for
using this product.

Before use

Q

Removing / attaching blades

Q
WARNING!
Always switch the product off and
disconnect it from the mains before
performing inspections, installing
accessories or making adjustments!
WARNING!
Always use the correct blade according
u
to the intended use! Observe the technical
requirements of this product (see "Technical
data") when purchasing and using blades!
Blades are very sharp and become hot
during use! Handle them carefully! Wear
safety gloves when handling blades in order
to avoid injuries like burns and cuts!
Never press the spindle lock whilst the
u
spindle is rotating! The arrow on the blade
must correspond to the arrow showing the
direction of rotation (running direction shown
on the product).
Ensure that the blade is suitable for the
u
rotational speed of the product.
1. Press the spindle lock button
spindle 17 .
2. Use the provided multi-tool
remove the blade bolt
10 (see fig. C)
3. Lift the lower blade guard
lower blade guard lever
position (see fig. D).
4. Remove the outer blade (marked "B") from its
drive flange 18 , then the inner blade (marked
"A") from its drive flange
Follow the above procedure in reverse order to
attach blades.
16 to lock the
to loosen and
22
and locking flange
9
8 by using the
and hold it in
11
.
19