Before Use; Lubrication; Topping Up The Oil - Parkside PDKS 6.3 B3 Originalbetriebsanleitung

Before use

Lubrication

WARNING!
► Avoid eye and skin contact with lubricants .
► Inform yourself about the health hazards of the oil used in the
safety data sheet of the respective manufacturer .
NOTE
► Regular lubrication is particularly important to avoid friction and
corrosion damage . We recommend using a suitable special oil
for compressed-air tools (e .g . Liqui Moly compressor oil) .
–
Lubrication with mist oiler
A mist oiler (not supplied) continuously and optimally lubri-
cates the grinder as a preparation stage after the pressure
reducer . A mist oiler gives off fine drops of oil into the air
flow and thus guarantees a regular lubrication .
–
Manual lubrication
If you do not have a mist oiler, lubricate the tool before
every use or longer work sessions . Add 3–5 drops of
pneumatic oil into the connector nipple

Topping up the oil

To ensure that the compressed-air saw remains operational for as
long as possible, make sure that there is sufficient pneumatic oil in
the appliance .
■ 68 │ GB │ MT
.