CleanSpace HALO CS3000 Bedienungsanleitung Seite 13

•
Fit the Harness
Holding the harness find the two keyhole clips at the end of each elastic strap. And the marker, indicating
the front of the harness. Fit the harness clips to the buttons on the inside of each Mask Airclip. Ensure that
the harness strap with the FRONT marker is towards the front of the mask and that there are no twists in
the straps. See Figure 8. And Figure 9.
Figure 8 - Harness Fitting The two straps of the harness fit to the inside of the AirClips on the mask.
FRONT MARKER
Figure 9 – Adjust Harness length By moving cleats up or down strap. ENSURE THE MARKER IS
LOCATED AT THE FRONT OF THE HEAD HARNESS.
13