Comet KE Classic Betriebs- Und Wartungsanleitung Seite 33

-
-
-
-
In these cases have the cleaner be checked by a Skilled Engineer.
• Special attention must be paid to the use of the water cleaner in rooms where there are
moving vehicles that can squash or damage the supply cable, the high-pressure hose, the
water gun, etc.
• During the operation, always keep checked the water cleaner and aloof from children's
reach. Pay special attention to the use of the water cleaners in nurseries and hospitals
because in these places there can be children, elders or disabled people without aid.
• Before operating the water cleaner, place it in a dry place in a level and stable position in
order to avoid falls or tilting. Activate the brake (26) of the turning wheel.
• Carry out the operations described in the paragraph "Stopping" before moving the water
cleaner.
• Before starting the water cleaner, wear clothes that guarantee a suitable protection from
wrong manoeuvres with the water jet under pressure. Do not use the water cleaner near
persons if they do not use protective cloths.
• The high-pressure jets can be dangerous if they are not used correctly. Do not direct the
jet towards persons, animals, electrical devices under voltage or towards the water cleaner
itself.
• During the use, strongly hold the water gun, because when you act on the lever (30) you are
subject to the reaction force of the high-pressure jet. The entity of this kick-back force is reported
in the technical data plate (the kick-back force is expressed in N where 1 N = 0.1 kg).
• Do not direct the jet against yourself or other persons to clean cloths or shoes.
• The tyres of vehicles must be washed at a distance not lower than 50 cm in order to avoid
that the high-pressure jet damages them. The first symptom of a damage to the tyres is a
change in colour.
• Do not direct the high-pressure jet towards materials containing asbestos or other substan-
ces which are damaging for the health.
• Do not use the water cleaner under the rain.
• Pay special attention to what mentioned in the paragraph "Checking and connecting the
electrical line".
• Pay special attention to what mentioned in the paragraph "Operation with detergent".
• When it is not running, do not leave the water cleaner with plug inserted in the current
socket and anyway remove it before any intervention. More specifically, always set the
main switch (1) to position "0", remove the plug from the socket and set the safety lever
of water gun (Fig. 1 - position A) in locked position:
-
-
-
Always wait that the water cleaner has been cooled down before any cleaning or maintenance
intervention.
• During the use do not lock the lever (30) of the water gun in always opened position.
• Do not remove the plug from the socket by pulling the cable.
• Do not interpose reductions or other adapters between plug and socket.
• Maintain the supplying body, the possible extensions, the plugs and sockets always dry. Do
not touch them with wet hands.
• If the supply cable has been damaged, to replace it apply to a Qualified Electrician.
• Only use the Gas oil for self-traction. The use of any other fuel can be dangerous.
Downloaded from www.Manualslib.com
the supply cable or other important parts, such as the safety devices,
delivery pipe or gun, are damaged;
the water cleaner has been overturned or has undergone strong hurts;
there are gas oil leaks;
there are visible water leaks.
before leaving it without control, even if for a short time;
before any fuel or detergent re-filling;
after the use.
manuals search engine
33