Herunterladen Inhalt Inhalt Diese Seite drucken

Product Maintenance - eta FALCO SMART Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 135
– If you have trouble pairing, first:
• Verify that the Wifi network settings and the operating system of the smart
device meet the specified requirements
• Restart the vacuum cleaner and smart device and repeat the process;
• If possible, try restarting the Wifi router itself;
• Verify that the vacuum cleaner is within the range of the Wifi signal;
• Check whether the vacuum cleaner has been charged.
– The WiFi network name and password for connection must contain only alphabetic
characters (a-z, lower case or capitals) and numbers (0-9).
– Some pairing problems can be caused by the saturation of Wifi networks and set-
up channels (especially in housing estates), causing collisions and outages. If such
failures occur, it usually helps to restart the vacuum cleaner itself or the Wifi router.
At the same time, for stable operation, your Wifi signal needs to be strong enough to
cover the entire area of the intended use of the vacuum cleaner.
– If your smart device is running Android 6.0 and above, you need to have location
detection turned on.

6 PRODUCT MAINTENANCE

To clean and maintain the cleaner and its accessories, please turn off the power first and
unplug the charger of charging base.
5.1. Dust bin
Take out the dust bin by pressing A4 button ,and pour out the trash.
The dustbin can be washed.
Note: the dust box should be completely air-dried before re-inserting.
Rinse the primary D4 and foam filter D5 under running water. Allow them to dry out proper-
ly before their re-use. Shake out the HEPA filter D6 gently, or blow it out. If the HEPA filter
is very dirty, you can rinse it under running lukewarm water. Allow it to dry out properly.
– If you clean the HEPA filter with water, its filtration properties will deteriorate. The
filter cannot be washed more than three times. After that, a new filter needs to be
purchased.
– We recommend that you replace the HEPA filter twice a year. The other filters are to
be replaced if they cannot be properly cleaned any more, or if they are damaged.
Remarks
Attention
EN - 73
EN

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis