EN
4.8.2. Set up schedule time
When the robot on wake up status, press the button B1 ,the robot will make a beep
sound. The sign " " and "MON"" start flash. And the robot enter clock setting status. Press
button B3
and B4
to change Monday to Sunday. Press clock B1
button to change
hour, minute. Press B3
and B4
to change the number.
You can select a cleaning time for each day.
After setting the time, press button B5
to save it, the robot will begin to work according
to the setting.
The vacuum cleaner must not be completely switched off, the main switch A14 must
always be in position "I".
* If no operation within 15 seconds, the robot will exit time setting, and the clock set this
time will not be saved.
* If not press key B5
to save, the current time setting is unsuccessful.
4.8.3. Cancel schedule setting
When the robot on wake up status, press the button B1 ,the robot will make a beep
sound, the sign " " and "MON" flash. And the robot enter clock setting status. Press button
B3
and B4
to change Monday to Sunday. Press B2
to shut down the setting, the
display shows " --:-- ". Press key B2
again, will activate the setting. The display shows
last time setting, after setting the time, press button B5
to save it.
Note - Turning off the main switch to "O" will cancel all setting (times and schedule list).
EN - 70