eta FALCO SMART Bedienungsanleitung Seite 65

CAUTION: Please turn on the power switch before charging.
B. Charging vith the remote control:
When the cleaner is in standby mode, press the „F1" button to have the machine enter the
recharge mode.
C. Charging with the B3 button on the vacuum cleaner
In standby mode, press the B3 button. Cleaner will switch into recharging mode.
D. Auto Charging
During cleaning process, robot can sense if low battery, and then it will automatically to find
the charging base for charging.
4.3 CLEANING
Click the button B5 on robot or remote control F3. The button B5 on the robot will flash.
For start press button of cleaning mode and vacuum cleaner begins cleaning. If you press
B5 or F3 the robot will start AUTO cleaning mode.
4.4 PAUSE
When the robot working, press the button B5 on robot or F3 on remote control to stop
working.
* When robot starts to work after pause, it will reschedule the area and possibly clean the
cleared area.
* When the robot under pause status, the remote control can control it move to left/right.
* When the pause time more than 3 mins, it will enter sleep status, the light B5 will turn off.
Colors of indicator B5:
- in orange light = charging;
- in green light = charging
finished;
- light off = under sleep mode
or Off mode
EN - 65
EN