eta FALCO SMART Bedienungsanleitung Seite 69

EN
4.8.SCHEDULING
For easy cleaning, the robot can set up current time on the control panel, and schedule the
future cleaning time through control panel.
4.8.1.
Set up current time
When robot at wake up status, long press the button B1 , the robot make a beep sound,
the display flashing, the robot enter clock setting status.
Press button B3 and B4 to adjust the number, press the B1 change hour, minute,
12/24 hour and week.
Setting the 12/24 hour: press to change the 12/24 hour, the display shows "ON/OFF".
After setting the time, press button B5 to save it.
* If no operation within 15 seconds, the robot will exit time setting, and the clock set this
time will not be saved.
* If not press key B5 to save, the current time setting is unsuccessful.
EN - 69