Product Installation; Product Operation; Start Charging; Charging Methods - eta FALCO SMART Bedienungsanleitung

EN

3. PRODUCT INSTALLATION

1) Please put the charging station on the flat ground against the wall.
2) Make sure no obstacles ahead 2 meters and within 1 meter's scope.
3) Connect the adapter to the charging station. Then plug the adapter info the power
socket.
4) Install the battery into remote control and virtual wall at right polarity.
The charging station can't be placed on the carpet. It is recommended to place it at
a fixed position for a long time. Please don't move the charging station during the
Install side brush
Install the brush according to the color of slot and make sure they are well installed.

4. PRODUCT OPERATION

4.1 START CHARGING

Power switch at side of the robot, "I" is turn on, "O" is off

4.2 CHARGING METHODS

A. Manual charging with the charging station
Connect the adapter to the charging station first, and then insert to the power supply;
Place the vacuum cleaner on the charging station for charging.
Note
cleaning.
When the light indicator B5
flashes, it means power on.
EN - 64