Error Codes (In The Data Records) - Lovibond Tintometer SD 335 Multi Bedienungsanleitung

8 Error codes (in the data records)

The error codes are not displayed as text in the data recording and when querying via the
interface. This has the background that with different languages otherwise no reference to
the actual error can be made.
Error code Text
0 OK
100000000 Measuring range exceeded
100000001 Measuring range not reached
100000010 Calculation not possible
100000011 System error
100000012 Battery empty
100000013 No sensor
100000014 Recording error
100000015 EEPROM checksum wrong
100000016 System restart
100000017 Data display error
100000018 Invalid data
100000020 Recording finished
100000021 Recording started
100000022 Channel deactivated
100000023 Temperature channel deactivated
100000024 No temperature sensor
100000025 No data available
-23 Sensor module does not respond
-10 Non-existent
-255 Unexpected error
-100 Error calibration
-75 Not found
-101 Not calibrated
-253 Value not stable
-251 Not in temperature range
*If the error remains, send device to service.
58
Notes
No error
Check calibration and sensor
Check calibration and sensor
Check settings
Restart the device*
Charge device
Plug in sensor
Restart the device*
Restart the device*
Device starts, wait briefly
Restart the device*
Restart the device*
Logger was stopped
Logger was started
Channel is deactivated in the device
menu
Check setting for temperature com-
pensation, activate O
2
Connect temperature sensor, check
setting for temperature compensa-
tion, activate O /Con input
2
Device has not measured anything
yet
Restart the device*
Restart the device*
Restart the device*
Perform calibration again
Restart the device*
Perform calibration
Ensure a stable environment
Check temperature
SD_335_1 06/2020
/Con input