Operating Time Limit; Mixed Zones; Booster Function - hanseatic MC-IV10241B2CC-A Gebrauchsanleitung

7-8 Steaming.
Cooking pasta.
9 Searing/frying.
Bringing soup to the boil.
Bringing water to the boil.

Operating time limit

Each cooking zone/mixed zone is provided
with an operating time limit. If the heat setting
is not changed for a prolonged period of time,
the cooking zone/mixed zone is automatically
switched off and the residual heat indicator
"H" is activated.
The maximum operating time is set in accord-
ance with the most recently selected heat set-
ting.
Heat setting Maximum operating time
1, 2, 3
4, 5, 6
7, 8, 9

Mixed zones

It makes sense to use the mixed zones if you
wish to use a large pot or roaster.
Please observe the correct positioning of the
cookware:
• Please also ensure that the cookware is
always placed in the middle of the mixed
zone.
• When using oval or rectangular roasters,
ensure that the middle covers both cook-
ing area sections.
• The cookware should cover at least ¾
of the mixed zone. It is not advisable to
place a round pot in the centre of a mixed
zone.
Cooking zones/mixed zones and sensors
8 hours
4 hours
2 hours
(10)
- -
-
--
(14)
1. Touch one of the sensors (10) for the
mixed zones.
2. Set the desired heat output using the slid-
er sensor (14).

Booster function

When the booster function is active, the cook-
ing zone/mixed zone heats up with maximum
power for 5 minutes. After this time, the cook-
ing zone/mixed zone returns to the original
heat setting. If the original heat setting was
" ", the cooking zone/mixed zone heats up
0
to heat setting " ".
9
The booster function is advisable e.g. for rap-
id searing or boiling water. It is also suitable
for fast boiling and continued cooking at a
reduced temperature. First select a medium
heat setting (e.g. " ") and then activate the
5
boost function.
The booster function can be switched on for
all cooking zones and the cooking area.
1. Touch the sensor of the cooking zone/
mixed zone for which you would like to
activate the boost function.
The heat setting display of the cooking
zone/mixed zone will flash.
- -
b.
--
2. Touch the boost sensor (13).
"b" now appears in the heat setting display.
Page EN-15
(10)
-
-
-
-
(13)