Operating Time Limit; Cooking Area; Booster Function - hanseatic MC-IF7127B2C-A Gebrauchsanleitung

Operating time limit

Each cooking zone/area is provided with an
operating time limit. If the heat setting is not
changed for a prolonged period of time, the
cooking zone/area is automatically switched
off and the residual heat indicator "H" is ac-
tivated.
The maximum operating time is set in accord-
ance with the most recently selected heat set-
ting.
Heat setting Maximum operating time
1, 2, 3
4, 5, 6
7, 8, 9

Cooking area

It makes sense to use the cooking area if you
wish to use a large pot or roaster.
Please observe the correct positioning of the
cookware:
• Always place the cookware in the middle
of the cooking area.
• When using oval or rectangular roasters,
ensure that the middle covers both cook-
ing area sections.
• The cookware should cover at least ¾
of the cooking area. It is not advisable to
place a round pot in the centre of a cook-
ing area.
1. Touch the selection sensor (8) for the
cooking area.
Cooking zones/areas and sensors
8 hours
4 hours
2 hours
(8)
2. Set the desired heat output using the slid-
er sensor (12).

Booster function

When the boost function is active the cooking
zone/area heats up at maximum power for 5
minutes. After this time the cooking zone/area
returns to the original heat setting. If the orig-
inal heat setting was "
0
area heats up to heat setting "
The booster function is advisable e.g. for rap-
id searing or boiling water. It is also suitable
for fast boiling and continued cooking at a
reduced temperature. First select a medium
heat setting (e.g. " ") and then activate the
5
boost function.
The booster function can be switched on for
all cooking zones and the cooking area.
1. Press the sensor for the cooking zone/
area that you wish to use the booster
function for.
The heat setting display of the cooking
zone/area flashes.
2. Touch the boost sensor (11).
" ." now appears in the heat setting dis-
b
play.
3. In order to deactivate the booster function
early, touch the sensor for the cooking
zone/area for which you wish to deacti-
vate the booster function.
4. Touch the boost sensor.
" ." will go out in the heat setting display
b
next to the selected cooking zone/area and
the original heat setting will once more be
displayed.
Page EN-15
", the cooking zone/
".
9
(11)