Troubleshooting - Renishaw PH20 Installations- Und Bedienungsanleitung

PH20 installation and user's guide
www.renishaw.com

Troubleshooting

For detailed troubleshooting of the PH20 system please refer to the CMM support knowledgebase (www.renishaw.com/cmmsupport) or
contact your local Renishaw office.
PH20 system status indicator LEDs
The head incorporates two LEDs for status indication in various modes, located as illustrated below.
LED
Off
Green
Red
Flashing red
Amber
* The 'Soft engage' is a fault condition where the PH20 head uses a weak motor drive and can be manually rotated to prevent damage.
Issued 03 2019
Downloaded from www.Manualslib.com
Servo LED
No power (probe LED also off)
Servos on
Servos off
Power, no comms
'Soft engage' mode*
manuals search engine
Probe LED
Probe triggered or module removed
Probe seated
Probe inhibited
n/a
n/a
38