Renishaw PH20 Installations- Und Bedienungsanleitung Seite 34

PH20 installation and user's guide
www.renishaw.com
TCR20
TCR20 is a compact probe module rack for use with PH20 that provides the capability for quick and repeatable tool changing and tip
correction.
Based on the industry standard range of MCR20 rack systems, TCR20 securely stores modules for rapid automatic changing, protecting
mating surfaces from any airborne contaminants within the working envelope of the machine.
TCR20 carries the full range of TP20 modules for use with a PH20 system and can accommodate a range of module and stylus combinations.
TCR20 features an integrated tip datum artefact in the centre of the rack assembly, reducing cycle time when measuring and performing the
tip correct procedure.
Tip correction is key when the absolute highest level of accuracy is required for certain applications. It compensates for any residual variations
after a tool change, maintaining a market leading level of accuracy from PH20.
TCR20 alignment and change routine
The following routines are handled through UCCserver for TCR20:
Alignment routine
Put down and pick up routine
Safe position
Issued 03 2019
Downloaded from www.Manualslib.com manuals search engine
34