Renishaw PH20 Installations- Und Bedienungsanleitung Seite 35

PH20 installation and user's guide
www.renishaw.com
Mounting TCR20 onto the CMM
NOTE: To minimise the machine volume lost it is recommended that the TCR20 is mounted as close as possible to the extreme
edge of the CMM's operating envelope.
1. Fix the rack base to the CMM bed using the appropriate fixing screw. Depending upon the size of screw required it may be necessary to also
use a washer.
2. Fit the TCR20 leg into the base and orientate the rack. Secure the rack in the correct orientation by tightening the three grubscrews that are
located in the rack base.
Issued 03 2019
Downloaded from www.Manualslib.com manuals search engine
35