Renishaw PH20 Installations- Und Bedienungsanleitung Seite 15

PH20 installation and user's guide
www.renishaw.com
TP20 stylus modules
PH20 has an integrated TP20 body that is capable of touch-trigger measurement when used with a suitable stylus module. The probe design
utilises the existing range of the TP20 stylus modules, however the TP20 extended force module is not suitable for use on PH20.
Each probe module, which houses the kinematic switching touch sensor mechanism, carries the stylus assembly and provides overtravel in
the X, Y and +Z axes ﴾–Z is offered when using the TP20 6‐way probe module﴿. Incorporating an M2 stylus mounting, each probe module is
compatible with Renishaw's comprehensive range of M2 styli.
Designed to minimise the possibility of probe module misalignment generating a probe 'seated' signal, the probe module is held in position
by a magnetically retained, highly repeatable kinematic coupling. Electrical contact pins conduct the probe sense voltage through the coupling.
Issued 03 2019
15
Downloaded from www.Manualslib.com manuals search engine