Renishaw PH20 Installations- Und Bedienungsanleitung Seite 32

PH20 installation and user's guide
www.renishaw.com
PH20 UCC license key
PH20 has its own unique license key for the UCC controller. Prior to commencing the installation sequence, the PH20 UCC license key must
be activated by following the instructions on leaflet H-1000-1244 that is included within the PH20 UCC kit.
PH20 initialisation and commissioning sequence
The PH20 system should be commissioned using Renishaw's UCCassist-2 software. PH20 specific sequences have been created for the
commissioning of the head.
The PH20 will be shipped with installation parameters stored inside the head. These parameters (hed files) are unique to the PH20 they are
shipped with. If the hed file is lost / deleted, please go to www.renishaw.com/cmmsupport and click on the hed file tab to download. You will
need to log in using RPS (you may need to register for this service) and then enter the head serial number to retrieve the correct hed file.
Alternatively contact your local Renishaw office, quoting the head serial number, to obtain a copy of the data file.
NOTE: Please do not modify the head file stored inside the PH20 head.
Issued 03 2019
32
Downloaded from www.Manualslib.com manuals search engine