Renishaw PH20 Installations- Und Bedienungsanleitung Seite 20

PH20 installation and user's guide
www.renishaw.com
Recommended stylus limits
Owing to the modular construction of the TP20 probe, it is recommended that the limits shown in the following figures are applied when
selecting styli to be used.
The low force probe module
The low force probe module has the following recommended stylus limits:
Steel and carbide styli up to 30 mm long
No star or cranked styli
The standard force probe modules (SF, EM1 and EM2)
The standard force probe modules (SF, EM1 STD and EM2 STD) can be used with the following range of styli:
Steel and carbide styli up to 40 mm long
Renishaw graphite fibre (GF) type styli up to 50 mm long
Star and cranked styli up to 20 mm offset
Issued 03 2019
Downloaded from www.Manualslib.com manuals search engine
20