Rapid MONTA M 141 Betriebsanleitung Seite 310

Rapid MONTA
Additional tyres (optional)
Fig. 19: Examples of additional tyres
1 Rubber-tyred single wheel
2 Rubber-tyred double wheel
3 Sprocket wheel
4 Rubber-tyred and sprocket wheel combina-
tion
5 Sprocket roll
Various wheels can be fitted to the machine
depending on the characteristics of the terrain
and the environment. Other combinations are
possible.
Weight rack (optional)
Fig. 20: Ballast weight
The ballast weights (Fig. 20/1) on the weight rack
are used to balance the machine and increase
the traction of the wheels.
Attachments increase the lifting power at the han-
dlebar. Fitting ballast weights to the weight rack
can reduce the lifting power.
12 Single-axle walk-behind tractor Rapid MONTA M 141/M 161
Lights (optional)
The lights are firmly mounted to the fastening
device. The lateral and vertical position of the
lights can be adjusted.
External intake port (optional, only for M 161)
Fig. 21: External intake port (optional)
The raised position with the external intake port
reduces the intake of cuttings. The air intake area
is shifted to within the operator's field of vision.
Oil cooler (optional, only for M 161)
Additional oil cooler for the hydraulic oil for
increased load of the travel drive.
20.04.2018